• Dummy straps install on the face of any door or gate to give the look of a decorative strap hinge. They are normally used in combination with full mortise butt hinges.
 
• Dummy straps made of solid bronze are for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Matching wood screws are included.
 
• These beautiful dummy straps are available in 6 lengths.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze dummy strap hinge for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Dummy straps provide a decorative strap look to a gate or door hinged with full mortise butt hinges.
 
• Available in two lengths. Both sizes are made from 1/4" thick material. Both sizes are 2" wide and measure 4" at the widest part.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• This very high quality solid bronze strap hinge is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This product is sold in components. The components consist of 2 items; a strap which attaches to the gate surface and a pintle which attaches to the post. The pintle is available as either a "Plate Pintle" or a "Screw-in Pintle".
 
• Lag screws are included. The Lag Screws are made from stainless steel and coated black. Lag Screws are available in two lengths (1.5" or 2.5"). Please specify which length you prefer in the "Comment" section when you checkout.
 
• Two hinges will support a 150 lb. gate or door. Three hinges will support a 250 lb. gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• This very high quality solid bronze strap hinge is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This product is sold in components. The components consist of 2 items; a strap hinge which attaches to the gate surface and a masonary pintle which is cemented into a masonary wall (for example block or stone) or post.
• Lag screws are included with the strap hinge. The Lag Screws are made from stainless steel and coated black. Lag Screws are available in two lengths (1.5" or 2.5"). Please specify which length you prefer in the "Comment" section when you checkout.
 
• The masonary pintle measures approximately 13.5" long by 1-1/8" in diameter. The pintle is 2.25" tall by 11/16" in diameter. The masonary pintle is made of solid brass and may be cut down in length by the end user if necessary.
 
• Two hinges will support a 150 lb. gate or door. Three hinges will support a 250 lb. gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

• These solid bronze Architectural Grade hinges are an alternative to surface mounted strap hinges. Architectural Grade butt hinges are thicker and of much higher quality than Residential Grade butt hinges.
• These hinges are installed on gates as "full mortise butt hinges" just as hinges are installed on the typical front door of a house. For a more decorative look, surface mount "dummy strap" hinges on the front of your gate.
 
• The 3” & 3-1/2” hinges come with wood screws.
• The 4” and larger hinges come with wood screws and machine screws.
• They are made of solid bronze base material with a stainless steel pin.
• Optional finials are available for most hinges, check our "Finials & Ball Tips for Door Hinges" section for either Type A or Type B finials.

*NRP HINGES (non-removable pin) have a set screw in the barrel that is accessible only when door is swung open. This security feature deters someone from removing the hinge pin and the door. NRP hinges are normally used for exterior doors that open out.

PAIR or EACH. Please note the UNIT when ordering hinges. We sell the hinges depending on how the manufacturer sells them to us. In this section if a hinge is sold by the PAIR you may order by the half pair. For example if you want 3 hinges order 1.5 pair when you check out. If the hinge is sold by the EACH and you need 3 hinges then order 3 EACH.

 
• Solid bronze non-working handle for gates and doors. From our "Solid Bronze Collection".
 
• This handle matches our Solid Bronze Thumb Latch and is ideal for use on double doors or gates.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze "dummy" thumb latch handle for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This dummy handle is non-operative. It is meant for use as a match for our 10" solid bronze "operable" thumb latch (SKU 850048). Normally used as the non-operable handle when you have double gates or double doors.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze thumb latch for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This thumb latch is made up of two components; a thumb latch (available in 8" or 10" and a drop bar (available with or without a knob). The thumb latch installs on the outside of the gate and the drop bar installs on the inside of the gate.
 
• The drop bar with knob (SKU 850060)measures 7.5" by 3.75".
 
• The drop bar without knob (SKU 850064) measures 6.5" by 4".
 
• For gate thicknesses up to 2-3/4".
 
• If you have a gate thickness more than the above dimensions order our Extension Kit (SKU 850044). Fits gate thickness up to 4". PLEASE NOTE; The Extension Kit (SKU 850044) will ship to you already installed in the thumb latch.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Solid bronze thumb latch for "Back-to-Back" gate or door installations. A "Back-to-Back" installation is one in which each thumb latch is installed exactly opposite each other, one on the inside of the gate and one on the outside of the gate.
 
• Our solid bronze hardware is for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This latch is made up of 3 components; an inside thumb latch, an outside thumb latch and a drop bar (latching mechanism). Each thumb latch measures 8-5/8" tall by approximately 1-7/8" wide at the widest point. The drop bar measures approximately 8" wide by 4" tall at the tallest point.
 
• There are 3 SKU's available depending on your gate thickness. SKU number 850110 fits for gate thicknesses of 1.5" to 2". SKU number 850111 for gate thicknesses of 2" to 2.5". SKU number 850112 for gate thicknesses of 2.5" to 3".
 
• Wood screws are included.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze gate stop will stop gate in the closed position. The installation of a gate stop prevents damage to your gate latch by stopping the gate before it hits the latch bar. Bronze latch bars will become weakened and eventually break if gates are allowed to slam against them.
 
• Gate stop measures 2" tall by 2" wide with a 1.5" projection.
 
• Mounting screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Solid bronze gate and door grill for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Grill measures 14-1/4" by 14-1/4" and is made from 1/2" square solid bronze.
 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 3-1/2".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the ring turn.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 4-3/4".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the ring turn.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Lever turn can be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase a Right Hand lever turn and a Left Hand lever turn (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Lever turn shown in photo is Left Hand model.
 
• Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the lever turn.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in two lengths; 12.5" and 17.5".
 
• The 12.5" size has a screw hole center to center dimension of 11.5".
 
• The 17.5" size has a screw hole center to center dimension of 16.5".
 
• Attachment screws are included (Stainless steel flat head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 1-3/4" in length or 2-1/2" in length.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting").  Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness.  There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".

 
• Very high quality Ring Turn Bar Latch for gates and doors.
 
• Latch operates from both sides of the gate.
 
• Made from solid bronze and is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in a "Right Hand" or "Left Hand" model. Model shown in photo is the "Right Hand" model.
 
• Drop Bar measures 7". Back Plates measure 2-3/4" by 4-1/2". Ring diameter is 3-1/2".
 
• Fits gate thicknesses of 3/4" to 2.5". The spindle that connects the front and back piece is a 5/16" square steel rod.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Solid bronze barrel bolt is lockable with a padlock (padlock not included).
 
• Bolt measures 8" long by 5/8" diameter.
 
• Handle measures 4".
 
• Mounting brackets are 1-3/4" by 3/4".
 
• Barrel bolt surface mounts to gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze cane bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Cane bolt measures 20" tall. Mounting plates measure 2" by 4".
 
• Cane bolt features a large diameter 5/8" bolt.
 
• Wood screws and a keeper for the bottom of the bolt are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Very high quality Lever Bar Latch for gates and doors. Made from solid bronze.
 
• Latch operates from both sides of the gate.
 
• Made from solid bronze and is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in a "Right Hand" or "Left Hand" model. Model shown in photo is the "Left Hand" model.
 
• Drop Bar measures 7". Back Plates measure 2-3/4" by 4-1/2". Lever is 6" with a 3-1/4" projection.
 
• Fits gate thicknesses of 3/4" to 2.5". The spindle that connects the front and back piece is a 5/16" square steel rod.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Solid bronze surface bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Surface bolt measures 8" long by 1-3/4" wide.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze door studs (also known as "Clavos" are a decorative item used to dress up doors or gates.
 
• They are made from solid bronze and will age like the other bronze items shown on our website.
 
• These door studs are available in two shapes; round and square. And they are available in two sizes; 1" and 2".
 
• Door studs install by gently taping into a pre-drilled hole in the door or gate.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid bronze shutter dog for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• For both working and non-working shutters.
   
• These shutter dogs are handed (Right Hand or Left Hand). As you are standing outside the house looking at your pair of shutters, the right hand shutter dog goes on the shutter on your right and the left hand shutter dog goes on the shutter on your left. The shutter dog in the photo is a Right Hand model. If you are ordering two shutter dogs for a window that has a shutter on each side, order one left hand and one right hand.
 
• The Shutter Dog measures 7" tall and 2-1/2" wide. Included is a 4.5" lag bolt. Please note; lag bolt is made from stainless steel.
 
• These shutter dogs are sold by the each. Order one shutter dog per shutter.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.