Blum | SKU: 652000

Blum 170 Degree Modul Hinge

Name: Blum 170 Degree Modul Hinge
Brand: Blum
SKU: 652000
Price: 7.76 USD
Availability: InStock

$7⁷⁶Each

Description

Important Note: This page is for the hinge only. Please read below to determine if additional components are required.

Mounting Plates for this hinge must be ordered separately. This is the component which mounts the hinge to the side wall of your cabinet. You can find these under related products below. The options available are:

Blum's Modul Frameless mounting plate (our SKU 652007).
Blum's "Special Face Frame Mounting Plate" (our SKU 701100).

Each hinge comes with two plastic dowels and screws. These are typically used for manufactured wood products such as MDF to provide a stronger hold. If drilling directly into hardwood, you can discard these and use two #6 x 5/8" wood screws (our SKU 652360) instead. These can be found under related products below.
If you are doing new construction we highly recommend that you use Blum's newer Clip Top Hinges rather than these older style Modul Hinges. Some common options can be found under related products below.
PLEASE NOTE: If you are going to use your existing Modul mounting plates to install this hinge the machine screw that attaches the hinge to the mounting plate is part of your existing mounting plate. That screw is not included with this hinge

Accessories available for this hinge:

Touch Latch (SKU 268038)
35mm Forstner Bit, for new installations (SKU 204000)
Ecodrill, installation jig, for new installations (SKU 701000)

Please note: Blum's Modul Face Frame mounting plate has been discontinued. If you have a face frame application, you will need to switch to the new clip top style hinge.

Warranty

Limited Warranty
Blum, Inc. (Blum) warrants its lift systems, hinges and/or drawer runners,
contained in this product, but not the product itself, against defects in material
and workmanship for as long as the original consumer purchaser owns the
products. This warranty is a warranty of replacement only. Blum specifically
does not warrant removal of the defective hardware nor installation of new
hardware. This warranty does not cover hardware which has been incorrectly
installed, exposed to excessive loads or otherwise used in any manner contrary
to its intended purpose. In the event the defective Blum hardware is obsolete or
has been discontinued, Blum reserves the right to replace the defective
hardware with a current offering. No guarantee of interchangeability is offered.

Other terms and conditions:
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE.

However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS
HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BLUM WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL BLUM BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR
FAILURE OF ITS HARDWARE.

However, some states do allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: 652000

CA Prop 65 Warning

Manufacturer

Blum
Model Number

91A6580
Finish Name

Nickel
Material

Steel
Self-Closing

Yes
Opening Angle

170 Degrees
Cup Diameter

35mm
Screw Hole Spacing

45mm (1-3/4")
Mounting Hardware Included

Yes
Mounting Hardware Type

Two 8mm dowels pre-attached with two dowel screws

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer service

I had been to 4 different hardware/custom cabinet stores in attempt to find the right hinge with no luck. After coming across this website I was helped within a couple hours and a few pictures sent. Amazing customer service.

Perfect replacement hinge

Just what I needed to fix the lazy Susan door

Only place I could find my style of hinges. Excellent quality, will buy all my hardware needs from here from now on. Thanks

Related Products

A table comparing the facets of 5 products
Facet	#6 x 5/8" European Hinge Screw View details	Blum 170 Degree Hinge for Face Frame Overlay Cabinets - Bundle View details	Blum 170 Degree Hinge for Frameless Overlay Cabinets - Bundle View details	Blum Modul Mounting Plate for Pie Cut Corner Doors View details	Blum Frameless Mounting Plate for Modul Hinge View details
Price
Price	$0⁰⁶Each	From $6⁴⁶Per Bundle	From $7⁷⁶Per Bundle	$16⁸⁶Each	$1⁸⁹Each
Description
Description	Specially made for European and Blum hinges. Steel base material. This #6 screw is for most European hinges and mounting plates. The #7...	Blum 170 degree hinge bundle for overlay doors on face frame cabinets. Available in self-closing and free swinging functionalities. The hinge and mounting...	Blum 170 degree hinge bundle for overlay doors on frameless cabinets. Available in self-closing and free swinging functionalities. The hinge and mounting plate...	Blum mounting plate for pie cut corner doors. Also used for non-pie cut corner doors. This mounting plate attaches to a cutout in...	Frameless cabinet mounting plate, made for Blum Modul hinges. These plates are for frameless cabinets (cabinets without a face frame). Plate attaches to...

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns