Grass  |  SKU: 701380

Grass Frameless Clip On Mounting Plates

$236 Each
Mounting Plate Height

Fasteners Not Included

Description

  • This clip on mounting plate is for Grass Tiomos hinges on frameless cabinets.
  • Each mounting plate uses two to four screws depending on the installation.
  • These mounting plates have a worn drive adjustment screw on the plate. The adjustment screw allows you to adjust your door height plus or minus 2mm. After installation, this screw is accessed through a hole in the hinge arm.

Warranty

Limited Warranty
Grass America, Inc. (“Grass”) warrants to the original consumer (the “Consumer”) its hinges, drawer slides, or accessory hardware manufactured by Grass against defects in materials and workmanship, as determined by Grass for the lifetime of the cabinetry, considered to be in a range of seven years.

This warranty does not cover any causes of malfunction such as misuse, abuse, neglect, accident, modification, commercial use, or improper installation.
Grass will send a replacement product to the Consumer for items that fall under the Limited Warranty. The Consumer shall be responsible for the shipping and handling costs currently in effect at the time of the replacement. This warranty covers replacement of defective parts only. The cost of removal, reinstallation and any incidental charges is the responsibility of the Consumer.

If the defective product has been discontinued, Grass reserves the right to replace the defective product with a comparable product currently manufactured. There is no guarantee of full interchangeability offered. The warranty does not apply to a discontinued product if at Grass’ discretion a comparable
product is not available. For items that do not fall under the Limited Warranty, Grass will continue to support the consumer by providing the most comparable replacements at a reasonable cost.

Machinery parts are not covered under this warranty.

ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED AS SET FORTH ABOVE. However, some states do not allow limitations on how long an implied warranty lasts, so the above limitations might not apply to you. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED. GRASS’ WARRANTY OBLIGATIONS AND THE CONSUMER’S REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HEREIN. IN NO EVENT SHALL GRASS BE LIABLE FOR ANY LOSS OF REVENUE OR PROFITS, LOSS OF USE OF EQUIPMENT, OR OTHER CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE, OR FAILURE OF ITS PRODUCTS. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
might not apply to you. This warranty gives you specific legal rights, and you may also have other rights that may vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: C10265

  • Manufacturer
    Grass
  • Finish Name
    Nickel
  • Material
    Steel
  • Plate Connection Type
    Clip-On
  • Mounting Hardware Included
    No
  • Mounting Hardware Type
    Two To Four #6 Flat Head Screws (Our SKU 652360)

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Anthony A.

Grass Frameless Clip On Mounting Plates

Related Products

A table comparing the facets of 5 products
Facet
European Hinge Screws
View details
Grass Soft-Close 110 Degree Hinge, Straight Arm
View details
Grass Soft-Close 110 Degree Hinge, Half Crank
View details
Grass Soft-Close 110 Degree Hinge, Full Crank
View details
Grass Soft-Close 160 Degree Hinge for Frameless Half Overlay Cabinets - Bundle
View details
Price
Price
From $006 Each
From $958 Each
$1075 Each
From $1085 Each
From $2106 Per Bundle
Description
DescriptionThese screws were specially made for European and Blum hinges. The #6 screw is for most European hinges and mounting plates. The #7... This product page is for the hinge only. It does not include the mounting plate or screws needed for installation. For further details... Grass Tiomos 110 degree hinge Half Crank 45mm hole spacing 3-Way adjustability This product page is for the hinge only. It does not... This product page is for the hinge only. It does not include the mounting plate or screws needed for installation. For further details... Half Cranked 160 degree hinge bundle for frameless cabinets with half overlay doors. This option provides smaller overlay dimensions than a straight arm...

We Are Here to Help

Get expert assistance with product selection and more.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns