Feeney Beveled Washers
Couldn't load pickup availability
Description
Description
These stainless steel Beveled Washers are specifically designed for use with CableRail Kits in wood or composite railing frames, providing a flat bearing surface when attaching fittings at angled stair terminations. The 32° angle is compatible with most stair slope angles, and special orders are available for 26° and 37° angles. Each termination fitting style has a corresponding beveled washer for precise fitting. Sold in packs of 4.
Beveled washers for Threaded Terminal Fittings
- (SKU #392018) have a 3/4" outside diameter and
3/8" inside diameter.
Beveled washers for Quick-Connect® Inset Fittings
- (SKU #392020) for 1/8" cable have a 3/4" outside
diameter and 3/8" inside diameter.
INSTALLATION
- Slide the beveled washer onto the cable protruding
from the post face then slide the fitting onto the
cable and proceed with installation steps.
Warranty
Warranty
Store Policies & Information
Store Policies & Information
Shipping & Delivery
Returns
Contact Us
We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.
Page Code: C11093
-
Manufacturer
-
MaterialStainless Steel (304)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
| Facet | ||||
|---|---|---|---|---|
| Price | ||||
| Price |
From
$4085
Per Kit
Unit price
/
Unavailable
|
$775
Per Pack
Unit price
/
Unavailable
|
$2900
Per Pack
Unit price
/
Unavailable
|
$1485
Per Pack
Unit price
/
Unavailable
|
| Description | ||||
| Description | Designed for frames where both end posts can be drilled through, the Feeney CableRail Kit for Wood Frame is an easy-to-install, pre-packaged solution... | Feeney End Caps are used to cover, protect, and finish the exposed ends of the Quick-Connect® Inset fittings that are visible at the... | Feeney End Caps are used to cover, protect, and finish the exposed ends of the Quick-Connect® Inset fittings that are visible at the... | These durable 316-grade stainless steel protector sleeves are designed for use with our CableRail Kit Systems to protect corner and stairway transition posts... |
Frequently Asked Questions
How long does it take to get my hardware once it's been ordered?
How long does it take to get my hardware once it's been ordered?
The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.
Do you ship merchandise outside the United States?
Do you ship merchandise outside the United States?
At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
Yes! Please click here to visit our Hinge Finder page.
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.
What is your return policy?
What is your return policy?
You can see our complete return policy here: HardwareSource Returns