Amerock | SKU: 398002

Single Demountable Reverse Bevel Hinge (Discontinued)

Name: Single Demountable Reverse Bevel Hinge (Discontinued)
Brand: Amerock
SKU: 398002
Availability: OutOfStock

$0⁰⁰Each

This hinge has been discontinued by the manufacturer. There is no remaining stock available for sale. We are leaving this page up on the website for reference only.

Options listed below are the closest replacements we carry, though both will require retrofitting in order for them to work.

Description

This hinge is made for "30 Degree Reverse Bevel" Doors attached with a single demountable hinge.
Single demountable hinges mount with an "insert" in the door and a single screw on the edge of the cabinet opening.
Hinge is self-closing.
These hinges are sold by the pair (2 hinges).
Hinge measures 2-1/4" tall and approximately 1-3/4" wide. Made from steel base material.
The overlay dimension is 13/32".

Warranty

Amerock, LLC Limited Warranty

Amerock, LLC ("Amerock") warrants that all Amerock® products will be free from defects in material and workmanship for as long as you, the original purchaser, own the product. This warranty is effective as of April 21, 2021 and supersedes all previous written Amerock warranties. If an Amerock product is found to have a defect in material or workmanship during the warranty term, Amerock will send to the original purchaser, without charge, a new replacement product of the same or comparable style and quality.

Warranty Limitations:

Because Amerock cannot control the quality of products sold by unauthorized sellers, this warranty applies only to Amerock products that were purchased from Amerock or an Amerock authorized seller, unless otherwise prohibited by law. Amerock reserves the right to reject warranty claims from purchasers for Amerock products purchased from unauthorized sellers, including unauthorized Internet sites.

There are no warranties beyond those stated herein. Any implied warranties that may be applicable to products, including implied warranties of merchantability or fitness for a particular purpose, are limited in duration to the duration of this warranty. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty does not include the removal or installation of Amerock products, which are the responsibility of the original purchaser. The Amerock warranty does not cover product failure caused by normal wear and tear, product misuse or abuse, improper installation, improper cleaning, accident, natural disaster, corrosive air, outdoor use, or alteration of any kind.

All Amerock finishes are handcrafted and held within a tight range of color variations. Slight variations in finish are not considered defects in material or workmanship.

Under no circumstances shall Amerock be liable for any special, incidental, or consequential damages based upon breach of this warranty, breach of contract, or strict liability. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: 398002

CA Prop 65 Warning

Manufacturer

Amerock
Finish Name

Burnished Brass
Material

Steel
Demountable Type

Single Demountable

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

A table comparing the facets of 4 products
Facet	1/2" Overlay Single Demountable Hinge View details	Reverse Bevel Hinge View details	1/4" Overlay Single Demountable Hinge View details	Clear Bumpers for Cabinet Doors View details
Price
Price	From $6⁷⁷Per Pair	$3⁵⁸Per Pair	From $6⁵⁵Per Pair	$5⁹⁹Each
Description
Description	Single demountable hinges use an insert that slides into a slot that is cut into the edge of the door. They are held...	This self-closing hinge is made for 30 degree reverse bevel doors. The center-to-center screwhole dimension for the hinge wing that mounts on the...	Single demountable hinges use an insert that slides into a slot that is cut into the edge of the door. They are held...	Clear, soft, bumpers for cabinet doors. Cabinet door bumper pads are self adhesive, and install to back of cabinet door to dampen closing...

About the Brand

Amerock

Amerock is your go-to for affordable yet functional cabinet hardware. With a heritage rooted in innovation and style, Amerock is a trusted name for decorative hardware solutions. They expertly merge function and affordability, offering homeowners, designers, and builders an extensive range of options to enhance the utility and aesthetics of their cabinets. Amerock understands that your home deserves both style and practicality, and their cabinet hardware, including budget-conscious hinges, is a testament to their commitment to making everyday living spaces both functional and cost-effective.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns