35mm Medicine Cabinet Hinge
Couldn't load pickup availability
Description
Description
- Replacement hinge and mounting plate for medicine cabinets.
- The mounting plate snaps on the hinge and can be removed from the hinge by pressing on a small lever.
- The hinges are adjustable after installation (in and out, up and down, and side to side) by means of three cam screws.
- Sold by the bundle. Each bundle includes one hinge, one mounting plate, and four screws for wood or metal.
- Most medicine cabinet doors will need two sets per door.
Dimensions
- Hinge cup fits into a 35mm diameter hole (1-3/8").
- The screw hole center-to-center dimension for the hinge screws is 45mm (approximately 1-3/4").
- The screw hole center-to-center dimension for the mounting plate screws is 32mm (approximately 1-1/4").
How to Size Your Hinge System
- Make sure your current hinge matches the dimensions above. If you have a wood cabinet. It is possible to fill and redrill your existing screw holes if necessary. If you have metal cabinets, your current installation dimensions must match exactly.
- Measure your pivot point height using the upper pivot point. See the document found under Downloads for instructions on how to measure this.
- Find your pivot point in the list below. The best choice will be the one where your pivot point falls in the middle of the pivot point ranges.
- Select the hinge and mounting plate listed next to your pivot point from the drop downs above.
| Pivot Height | Hinge | Mounting Plate |
| 1/2" to 3/4" | Straight Arm Hinge | 0mm mounting plate |
| 5/8" to 7/8" | Straight Arm Hinge | 3mm mounting plate |
| 3/4" to 1" | Straight Arm Hinge | 6mm mounting plate |
| 7/8" to 1-1/4" | Straight Arm Hinge | 9mm mounting plate |
| 15/16" to 1-1/8" | Half Cranked Hinge | 0mm mounting plate |
| 1-1/16" to 1-1/4" | Half Cranked Hinge | 3mm mounting plate |
| 1-3/16" to 1-1/2" | Full Cranked Hinge | 0mm mounting plate |
| 1-5/16" to 1-5/8" | Full Cranked Hinge | 3mm mounting plate |
| 1-7/16" to 1-3/4" | Full Cranked Hinge | 6mm mounting plate |
| 1-9/16" to 1-7/8" | Full Cranked Hinge | 9mm mounting plate |
| 1-7/8" to 2-1/4" | Full Cranked Hinge | 18mm mounting plate |
Replacing Medicine Cabinet Hinges
- When replacing hinges on a medicine cabinet it is necessary to replace all the hinges and mounting plates on any for that are you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly different articulations.
- The hinge and mounting plate combination that you receive may look slightly different than what you see in the above image. To achieve all of the different pivot point heights we use three different hinge types and five different mounting plate heights.
Store Policies & Information
Store Policies & Information
Shipping & Delivery
Returns
Contact Us
We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.
Page Code: B10027
-
Manufacturer
-
Model Number
-
Finish Name
-
MaterialSteel
-
Cabinet Door TypeFlush Inset, Half Overlay, Full Overlay, Medicine Cabinet
-
Soft CloseNo
-
Self-ClosingYes
-
Plate Connection Type
-
Opening Angle110 Degrees
-
Cup Diameter
-
Screw Hole Spacing45mm (1-3/4")
-
Mounting Hardware Included
-
Mounting Hardware Type
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
| Facet | |||||
|---|---|---|---|---|---|
| Price | |||||
| Price |
From
$039
Each
Unit price
/
Unavailable
|
From
$049
Each
Unit price
/
Unavailable
|
$099
Each
Unit price
/
Unavailable
|
From
$007
Each
Unit price
/
Unavailable
|
$839
Per Bundle
Unit price
/
Unavailable
|
| Description | |||||
| Description | Cover caps cover up the screws on your Blum hinge Easily snap onto Blum "Clip Top" hinges. 110 Degree Model Works on any... | Blum cover caps are designed to cover up the screws on Blum hinges. Gives Blum European hinges a more elegant, finished look. Cover... | Restriction clip keeps door from opening more than 86 degrees. This is valuable for cabinet door installations which may open too wide and... | Plastic dowel and dowel screw for European hinge push-in type installations. Typically used on manufactured wood products where wood screws do not hold... | Replacement hinge and mounting plate system for Medicine Cabinets which use a 170 degree wide opening hinge. The hinge is adjustable after installation... |
Frequently Asked Questions
How long does it take to get my hardware once it's been ordered?
How long does it take to get my hardware once it's been ordered?
The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.
Do you ship merchandise outside the United States?
Do you ship merchandise outside the United States?
At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
Yes! Please click here to visit our Hinge Finder page.
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.
What is your return policy?
What is your return policy?
You can see our complete return policy here: HardwareSource Returns