Blum  |  SKU: 652304

Blum Clip Top Face Frame Mounting Plates

$129 Each
Mounting Plate Height

Fasteners Not Included

Description

  • These mounting plates are made for Blum hinges on face frame cabinets.
  • Will work on any Blum "clip top" or "clip" hinges.
  • These plates mount on the cabinet on the edge of the face frame.

Replacements

  • When replacing worn out or broken Blum hinges, it is a good idea to replace all the hinges and mounting plates on your door at the same time.
  • If you have an existing Blum mounting plate that you would like to replace, simply match the height of your plate to the height of one of these plates. See the document found under Downloads to learn how to measure the height of your existing plate.
    • 0mm Plate (Blum 175L660) - 5/16" actual height
    • 3mm Plate (Blum 175L663) - 7/16" actual height
    • 6mm Plate (Blum 175L666) - 9/16" actual height
Note: For years cabinet makers have incorrectly installed these mounting plate with #6 screws instead of the correct #7 screws. This causes the plates to eventually crack. Please use #7 screws when installing these plates. Screws are not included.

Warranty

Limited Warranty
Blum, Inc. (Blum) warrants its lift systems, hinges and/or drawer runners,
contained in this product, but not the product itself, against defects in material
and workmanship for as long as the original consumer purchaser owns the
products. This warranty is a warranty of replacement only. Blum specifically
does not warrant removal of the defective hardware nor installation of new
hardware. This warranty does not cover hardware which has been incorrectly
installed, exposed to excessive loads or otherwise used in any manner contrary
to its intended purpose. In the event the defective Blum hardware is obsolete or
has been discontinued, Blum reserves the right to replace the defective
hardware with a current offering. No guarantee of interchangeability is offered.

Other terms and conditions:
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE.

However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS
HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BLUM WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL BLUM BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR
FAILURE OF ITS HARDWARE.

However, some states do allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: C10213

  • Manufacturer
    Blum
  • Model Number
    175L660 (0mm Plate)
    175L663 (3mm Plate)
    175L666 (6mm Plate)
  • Finish Name
    Nickel
  • Material
    Cast Metal
  • Plate Connection Type
    Clip-On
  • Mounting Hardware Included
    No
  • Mounting Hardware Type
    Two #7 Flat Head Screws (Our SKU 268000)

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Based on 9 reviews
67%
(6)
22%
(2)
11%
(1)
0%
(0)
0%
(0)
C
Craig K.
THEY SAVED ME

After looking everywhere at all the conventional hardware stores{Home Depot, Lowes, Ace} for a particular cabinet hinge , i discovered Hardware Source online.
After sending them pictures of the hinge with follow up questions from them regarding measurements and hinge placement , they were able to send me the exact hinges I was looking for. . They are now my go to source for hard to find items.Highly recommended.

P
Pauline s.
Replacement Blim hinges

Thanks for Eddie's help choicing the right hinges

S
Steven H.

Blum Clip Top Face Frame Mounting Plates

P
Paul W.
Blum mounting plates

Everything worked like a charm.

M
Menno C.

The product was good, well made and high quality but didn’t work for my application.

Related Products

A table comparing the facets of 5 products
Facet
#7 x 5/8" European Hinge Screw
View details
Blum Blumotion Straight Arm Hinge
View details
Blum Blumotion Half Crank Hinge
View details
Blum Blumotion Full Crank Hinge
View details
Blum 170 Degree Self Closing Hinge
View details
Price
Price
$006 Each
$584 Each
$599 Each
$499 Each
$493 Each
Description
DescriptionSpecially made for European and Blum hinges. Steel base material. This #7 screw is for Blum Face Frame Mounting Plates. The #6 screw... This product page is for the hinge only. It does not include the mounting plate or screws needed for installation. For further details... This product page is for the hinge only. It does not include the mounting plate or screws needed for installation. For further details... This product page is for the hinge only. The mounting plate and screws required for installation are not included. For further details about... This product page is for the hinge only. It does not include the mounting plate and screws needed for installation. For further details...

We Are Here to Help

Get expert assistance with product selection and more.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns